G Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: G SENSOR INSPECTION

Connect connector (1) to sensor (2) securely.
Install sensor (2) onto floor so that arrow mark (4) directs vehicle forward (3).
Tightening torque

G sensor mounting bolt a: 6.0 N.m (0.6 kg-m, 4.5 lb-ft)

Fig 1: Identifying Connector, G Sensor, Vehicle Direction & Arrow Mark
Courtesy of SUZUKI OF AMERICA CORP.
Install rear console box.