Driver Air Bag (Inflator) Module Inspection
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
Reference: DRIVER AIR BAG (INFLATOR) MODULE REMOVAL AND INSTALLATION
WARNING:
Never disassemble air bag (inflator) module or measure its resistance. Otherwise, personal injury may result.
CAUTION:
If air bag (inflator) module was dropped from a height of 90 cm (3 ft) or more, it should be replaced.
Check air bag (inflator) module visually and if any of the following is found, replace it with a new one.
- Air bag being deployed
- Trim cover (pad surface) (1) being cracked
- Inflator case (2) being damaged or having been exposed to strong impact (dropped)