Not Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to ON position and wait about 6 seconds or more.
Using service wire (4), repeat shorting and opening between diagnosis switch terminal (3) on "AIR BAG" monitor coupler (1) and body ground (2) 5 times at about 1 second intervals.

Fig 1: Identifying Monitor Coupler, Body Ground, Terminal & Service Wire
Courtesy of SUZUKI OF AMERICA CORP.
Perform DTC CHECK FOR SDM and confirm that normal DTC (No. 0000) is displayed and not malfunction DTC.
NOTE: If DTC B1013 or DTC B1021 is stored in SDM, it is not possible to clear DTC.