Tightening Torque Specification
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Center support mounting bolts | 50 | 5.0 | 36.5 |
| Front propeller shaft flange nuts | 50 | 5.0 | 36.5 |
| Rear propeller shaft flange nuts | 60 | 6.0 | 43.5 |
| Stabilizer bar mounting bracket bolt | 23 | 2.3 | 17.0 |
NOTE:
The specified tightening torque is also described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION.