Tightening Torque Specifications
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Exhaust manifold bolt and nut | 30 | 3.0 | 21.5 |
| Exhaust No.1 pipe bolt | 50 | 5.0 | 36.5 |
| Front propeller shaft flange nut | 50 | 5.0 | 36.5 |
NOTE:
The specified tightening torque is also described in the following. Exhaust System Components
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION.