Blower Motor Controller Inspection
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
Reference: BLOWER MOTOR CONTROLLER REMOVAL AND INSTALLATION
Measure each terminal-to-terminal resistance on blower motor controller.
If measured resistance is incorrect, replace blower motor controller with new one.
BLOWER MOTOR CONTROLLER RESISTANCE
| Terminal | Resistance (kΩ) | |
|---|---|---|
| + Wire | - Wire | |
| 4 | 2 | Continuity |
| 4 | 3 | Approx. 10.18 |
| 2 | 4 | No continuity |
| 2 | 3 | No continuity |
| 3 | 4 | Approx. 10.18 |
| 3 | 2 | Continuity |