Tightening Torque Specifications
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Battery ground bolt | 8.0 | 0.8 | 6.0 |
| Generator mounting bolt | 23 | 2.3 | 17.0 |
| Generator mounting bolt | 48 | 4.8 | 34.7 |
| "B" terminal outer nut | 6.9 | 0.69 | 5.0 |
| Stator stud bolt | 8.8 | 0.88 | 6.5 |
| Drive end bearing retaining plate screw | 2.6 | 0.26 | 2.0 |
| Rear end frame nut | 4.5 | 0.45 | 3.5 |
| Generator pulley nut | 111 | 11.1 | 80.5 |
| Rectifier screw | 2 | 0.2 | 1.5 |
| Rectifier "B" bolt | 3.9 | 0.39 | 3.0 |
| Regulator and brash holder screw | 2 | 0.2 | 1.5 |
| Rear end cover nut | 4.5 | 0.45 | 3.5 |
| Terminal plate bolt | 3.8 | 0.38 | 3.0 |
| "B" terminal inner nut | 8 | 0.8 | 6.0 |
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION.