Generator Dismounting and Remounting: Remounting
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
- Mount generator on the generator bracket.
- Tighten generator bolts (upper bolt (short) (1), lower bolt (long) (2)).
Tightening torque
Generator mounting bolt a: 23 N.m (2.3 kg-m, 17.0 lb-ft)
Generator mounting bolt c: 48 N.m (4.8 kg-m, 34.7 lb-ft)
- Install generator (cooling fan) belt. Refer to COOLING FAN / GENERATOR BELT REMOVAL AND INSTALLATION.
- Connect "B" terminal wire (3) and coupler to generator.
Tightening torque
"B" terminal outer nut b: 6.9 N.m (0.69 kg-m, 5.0 lb-ft)
- Connect negative (-) cable at battery.