Tightening Torque Specifications
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Oil pressure switch | 13 | 1.3 | 9.5 |
| Oil pump strainer bolt | 11 | 1.1 | 8.0 |
| Upper oil pan bolt | Tighten 11 N.m (1.1 kgf-m, 8.0 lb-ft) by the specified procedure | ||
| Upper oil pan nut | Tighten 11 N.m (1.1 kgf-m, 8.0 lb-ft) by the specified procedure | ||
| Oil pump strainer bracket bolt | 11 | 1.1 | 8.0 |
| Lower oil pan bolt | Tighten 11 N.m (1.1 kgf-m, 8.0 lb-ft) by the specified procedure | ||
| Lower oil pan nut | Tighten 11 N.m (1.1 kgf-m, 8.0 lb-ft) by the specified procedure | ||
| Engine oil drain plug | 50 | 5.0 | 36.5 |
| Stiffener bolt | Tighten 55 N.m (5.5 kgf-m, 40.0 lb-ft) by the specified procedure | ||
| Oil pump sprocket bolt | 45 | 4.5 | 32.5 |
| Oil pump chain guide bolt | 11 | 1.1 | 8.0 |
| Oil pump mounting bolt (short) | 27 | 2.7 | 19.5 |
| Oil pump mounting bolt (long) | 27 | 2.7 | 19.5 |
| Oil pump bolt | 12 | 1.2 | 9.0 |
NOTE:
The specified tightening torque is also described in the following.
Oil Pan and Oil Pump Strainer Components
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION.