Throttle Position (TP) Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Install TP sensor (1) to throttle body (2).
Fit TP sensor (1) to throttle body (2) in such way that its holes are a little away from TP sensor screw holes as shown in the figure and turn TP sensor (1) clockwise so that those holes align.

Tightening torque

TP sensor screw a: 3.5 N.m (0.35 kg-m, 2.5 lb-ft)

Fig 1: Identifying Throttle Position Sensor & Throttle Body
Courtesy of SUZUKI OF AMERICA CORP.
Connect coupler to TP sensor (1) securely.
Connect battery negative cable (-) to battery.