Idle Air Control (IAC) Valve Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: IDLE AIR CONTROL (IAC) VALVE INSPECTION

Install new O-ring to throttle body.
Install IAC valve to throttle body.
Tighten IAC valve screws to specified torque.
Tightening torque

IAC valve screw a: 3.5 N.m (0.35 kg-m, 2.5 lb-ft)

Fig 1: Identifying IAC Valve Screws
Courtesy of SUZUKI OF AMERICA CORP.
Install surge tank cover.
Connect IAC valve connector securely.
Connect negative cable (-) to battery.