Heated Oxygen Sensor (Sensor 2) Removal and Installation: Removal

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: To avoid danger of being burned, do not touch exhaust system when system is hot. Oxygen sensor removal should be performed when system is cool.

Disconnect negative (-) cable from battery.
Disconnect coupler (3) of oxygen sensor(s).
Remove oxygen sensor(s) (2) from exhaust manifold(s) (1).

NOTE: Be careful not to expose it to excessive shock.

Fig 1: Identifying Exhaust Manifold, Heated Oxygen Sensor 2 And Oxygen Sensor Coupler

Courtesy of SUZUKI OF AMERICA CORP.