Engine Coolant Temperature (ECT) Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: ENGINE COOLANT TEMPERATURE (ECT) SENSOR INSPECTION

Reverse removal procedure noting the followings.

Clean mating surfaces of sensor and water outlet cap (1).
Use new O-ring.
Tighten ECT sensor to specified torque.
Tightening torque

ECT sensor a: 15 N.m (1.5 kg-m, 11.0 lb-ft)

Fig 1: Identifying Water Outlet Cap And ECT Sensor
Courtesy of SUZUKI OF AMERICA CORP.
Connect coupler to sensor securely.
Refill cooling system.