Intake Control Valve Inspection
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
- Connect special tool (A) to intake control valve (1).
Special Tool
(A): 09917-47011
- Apply vacuum to intake control valve (1) and verify that throttle (2) fully closes within the specified range.
If intake control valve (1) fails the check, replace it.
CAUTION: Do not apply above 88 kPa of negative pressure. Damage may occur to intake control valve (1).Valve operation pressure
1.3 - 34 kPa (9.8 - 255 mmHg)
- Let the throttle (2) close for 15 seconds with no vacuum application and inspect throttle travel. If throttle travel decreases, replace intake air valve (1).