LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine General Information And Diagnosis) >> General Description >> OBD System Description - Oxygen Sensor Monitor >> Primary HO2S Circuit Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary HO2S Circuit Monitor

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Operation 

PRIMARY HO2S CIRCUIT MONITOR OPERATION

DTCs P0131 (for bank 1) / P0151 (for bank 2)
Monitor execution Continuous
Sensors / components OK IAT, ECT, Barometric pressure, MAF, Primary HO2S, Primary HO2S heater
Monitoring Duration 30 s
PRIMARY HO2S CIRCUIT MONITOR OPERATION

DTCs P0132 (for bank 1) / P0152 (for bank 2)
Monitor execution Continuous
Sensors / components OK Primary HO2S heater
Monitoring Duration 3 s

Enable conditions 

PRIMARY HO2S CIRCUIT MONITOR ENABLE CONDITIONS

Parameter Minimum Maximum
P0131, P0151 
F/C mode Off
Fuel feedback mode On
Time from engine start   2 s
ECT   110 (230) °C (°F)
IAT -8 (17.6) °C (°F)  
Primary HO2S heater operation time 24 s  
Barometric pressure 74.5 kPa  
Misfire No DTC
EGR system monitor No DTC
Fuel system monitor No DTC
P0132, P0152 
Battery voltage 11 V 16 V

Typical malfunction thresholds 

PRIMARY HO2S CIRCUIT MONITOR TYPICAL MALFUNCTION THRESHOLDS

P0131, P0151 
Low voltage 
Pull-up voltage ≥ 4.5 V
O2S voltage < 0.05 V
P0132, P0152 
High voltage 
HO2S voltage > 1.2 V