Tightening Torque Specifications
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Differential oil level/filler plug | 50 | 5.0 | 36.5 |
| Differential oil drain plug | 28 | 2.8 | 20.5 |
| Differential carrier bolt | 55 | 5.5 | 40.0 |
| Propeller shaft flange nut | 60 | 6.0 | 43.5 |
| Differential case screw | 9 | 0.9 | 6.5 |
| Bevel gear bolt | Tighten 40 N.m (4.0 kgf-m, 29.5 lb-ft) + 50° | ||
| Bearing cap bolt (Provisional torque) | 15 | 1.5 | 11.0 |
| Lock plate bolt | 12 | 1.2 | 9.0 |
| Bearing cap bolt | 85 | 8.5 | 61.5 |
NOTE:
The specified tightening torque is also described in the following. Rear Differential Components
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION.