LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Differential) >> Front >> Repair Instructions >> Front Differential Reassembly >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Differential Reassembly: Notes

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FRONT DIFFERENTIAL DISMOUNTING AND REMOUNTING: FRONT 

Reference: FRONT DIFFERENTIAL DISASSEMBLY: FRONT 

Reference: FRONT DIFFERENTIAL INSPECTION: FRONT 

Judging from abnormal conditions noted before disassembly and what is found through visual check of bearing and gear tooth etc. after disassembly, prepare replacing parts and start reassembly according to procedures as described below.

CAUTION:
  • Bevel gear and pinion must be replaced as a set even if either one of them has to be replaced.
  • When replacing taper roller bearing, replace as inner race & outer race assembly.
scientia non olet · About LEMON Manuals