Tightening Torque Specifications
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Oil drain plug and level / filler plug | 23 | 2.3 | 17.0 |
| 4WD switch | 20 | 2.0 | 14.5 |
| 4WD low switch | 20 | 2.0 | 14.5 |
| Transfer fork switch | 20 | 2.0 | 14.5 |
| VSS mounting bolt | 6 | 0.6 | 4.5 |
| Transfer shift actuator mounting bolt | 23 N.m (2.3 kgf-m, 17.0 lb-ft) by the specified procedure | ||
| Center case gutter bolt | 8 | 0.8 | 6.0 |
| Rear case plate bolt | 8 | 0.8 | 6.0 |
| Locating spring bolt | 26 | 2.6 | 19.0 |
| Synchronizer plate screw | 8 | 0.8 | 6.0 |
| Front case bolt | 23 | 2.3 | 17.0 |
| Countershaft plate bolt | 23 | 2.3 | 17.0 |
| Rear case bolt | 23 | 2.3 | 17.0 |
| Shift fork switch | 20 | 2.0 | 14.5 |
| Transfer shift actuator bracket mounting bolt | 23 N.m (2.3 kgf-m, 17.0 lb-ft) by specified procedure | ||
NOTE:
The specified tightening torque is also described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .