Transfer Shift Actuator Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Be sure to position transfer shift actuator to 4H position referring to "Actuator Shift Position Sensor" under Transfer Shift Actuator Inspection .

Install transfer shift actuator (1) and new gasket to transfer rear case (2), and then tighten transfer shift actuator bolts (3) first and then bolt (4).

Tightening torque

Transfer shift actuator mounting bolt a: 23 N.m (2.3 kgf-m, 17.0 lb-ft) by the specified procedure

Fig 1: Identifying Transfer Shift Actuator, Transfer Rear Case And Transfer Shift Actuator Bolts

Courtesy of SUZUKI OF AMERICA CORP.