LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Transfer) >> Diagnostic Information and Procedures >> DTC Clearance >> Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to OFF position.
  2. Connect SUZUKI scan tool to data link connector (DLC) (1) located on underside of instrument panel.

    Special Tool 

    (A): SUZUKI scan tool 

    Fig 1: Connecting SUZUKI Scan Tool To Data Link Connector (DLC)
    G04722152Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn ignition switch to ON position.
  4. Erase DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operator's manual for further details.
  5. After completing clearance, turn ignition switch OFF and disconnect SUZUKI scan tool from data link connector (DLC).
  6. Perform DTC Check  and confirm that NO CODES is displayed.
scientia non olet · About LEMON Manuals