LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Automatic Transmission) >> Repair Instructions >> Transmission Range Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Range Sensor Removal and Installation: Removal

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable at battery.
  2. Hoist vehicle.
  3. Disconnect transmission range sensor connector (1).
  4. Disconnect select cable (2) from manual select lever (3).
  5. Remove manual select lever (3) from transmission range sensor (4).
    Fig 1: Identifying Select Cable, Connector, Transmission Range Sensor And Select Lever
    G04722596Courtesy of SUZUKI OF AMERICA CORP.
  6. Unbend bend parts of lock washer (1), then remove manual shift shaft nut (2), lock washer (1) and grommet.
  7. Remove transmission range sensor (3) by removing sensor bolt (4).
    Fig 2: Identifying Transmission Range Sensor, Lock Washer, Shaft Nut & Sensor Bolt
    G04722597Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals