Shift Lock (Solenoid) Manual Release System Inspection

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Shift lock can be manually released by the following procedure.

Remove access hole cover (1) by unfastening screw (2).
Turn ignition key to "ACC" position and move shift lock solenoid rod (or manual release plate) toward rear side of vehicle by using flat end rod or the like.
In this state, select lever (3) can be moved to any range or position.

Fig 1: Identifying Select Lever, Screw And Access Hole Cover
Courtesy of SUZUKI OF AMERICA CORP.