LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Automatic Transmission) >> Diagnostic Information and Procedures >> DTC Check >> Reading DTC Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reading DTC Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect SUZUKI scan tool to data link connector (DLC).

    Special Tool 

    (A): SUZUKI scan tool 

    Fig 1: Identifying Suzuki Scan Tool
    G04722532Courtesy of SUZUKI OF AMERICA CORP.
  3. Read DTC according to instructions displayed on SUZUKI scan tool and write it down. Refer to SUZUKI scan tool operator's manual for further details.
  4. After completing the check, turn ignition switch OFF and disconnect SUZUKI scan tool from data link connector (DLC).
scientia non olet · About LEMON Manuals