Manual Transmission Rear Case Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Remove countershaft gutter (2) from transmission rear case (1).

Fig 1: Identifying Countershaft Gutter & Transmission Rear Case
Courtesy of SUZUKI OF AMERICA CORP.
Take out oil seal (1) from rear case (2).

Fig 2: Identifying Oil Seal & Rear Case
Courtesy of SUZUKI OF AMERICA CORP.
Remove interlock cam plug (1) by using torx® wrench (2).

Fig 3: Identifying Interlock Cam Plug & Torx® Wrench
Courtesy of SUZUKI OF AMERICA CORP.
Remove interlock cam pin using special tool.
Special Tool

(A): 09922-85811

Fig 4: Identifying Interlock Cam Pin Special Tool
Courtesy of SUZUKI OF AMERICA CORP.
Pull out interlock cam component (1).

Fig 5: Identifying Interlock Cam Component
Courtesy of SUZUKI OF AMERICA CORP.