Bump Stopper / Spring Rubber Seat Removal and Installation: Installation
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
- Tighten bump stopper (1) to specified torque, using special tool (A).
Special Tool
(A): 09941-66010
Tightening torque
Bump stopper a: 50 N.m (5.0 kg-m, 36.5 lb-ft)
- Install spring rubber seat.
- Install coil spring. Refer to COIL SPRING REMOVAL AND INSTALLATION .