Front Disc Brake Caliper Disassembly and Assembly: Assembly: Notes
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
Reference: FRONT DISC BRAKE CALIPER REMOVAL AND INSTALLATION
Reference: FRONT DISC BRAKE CALIPER INSPECTION
Reassemble front brake in reverse order of disassembly, noting the following points.
CAUTION:
- Wash each part cleanly before installation in the same fluid as the one used in master cylinder reservoir.
- Never use other fluid or thinner.
- Before installing piston and piston seal to cylinder, apply fluid to them.
- After reassembling brake lines, bleed air from them.