Fuel Pressure Regulator Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure for installation noting the following.

Use new O-ring.
Apply thin coat of gasoline to O-ring to facilitate installation.

Fig 1: Applying Thin Coat Of Gasoline To O-Ring
Courtesy of SUZUKI OF AMERICA CORP.
Tighten fuel pressure regulator bolts to specified torque.
Tightening torque

Fuel pressure regulator bolt a: 11 N.m (1.1 kg-m, 8.0 lb-ft)

Fig 2: Identifying Fuel Pressure Regulator Bolts
Courtesy of SUZUKI OF AMERICA CORP.
With engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.