EVAP Leak Detecting Pump Circuit Check
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to ON position, clear DTC and select "MISC TEST" mode on SUZUKI scan tool.
- Using SUZUKI scan tool, check that operating sound of EVAP leak detecting pump is heard only when pump is switched ON.
If operating sound of EVAP leak detecting pump is heard, EVAP leak detecting pump and its circuit are in good condition.
If operating sound of EVAP leak detecting pump is not heard, check EVAP leak detecting pump, wire harness and connections.