EVAP Leak Check Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

For installation, reverse removal procedure noting the following.

Apply gasoline to O-ring of EVAP leak check module.
Tighten EVAP leak check module bolts to specified torque.
Tightening torque

EVAP leak check module bolt a: 5.5 N.m (0.55 kg-m, 4.0 lb-ft)

Fig 1: Identifying EVAP Leak Check Module Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install EVAP canister with EVAP leak check module referring to EVAP CANISTER REMOVAL AND INSTALLATION