EGR System Inspection (Using SUZUKI Scan Tool)

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Connect SUZUKI scan tool to DLC (1) with ignition switch OFF.
Special Tool

(A): SUZUKI scan tool

Fig 1: Identifying SUZUKI Scan Tool & DLC
Courtesy of SUZUKI OF AMERICA CORP.
Start engine and warm it up to normal operating temperature.
With engine idling (without depressing accelerator pedal), open EGR valve by using "MISC. TEST" mode. In this state, according as EGR valve opening increases engine idle speed drops. If not, possible cause is clogged EGR gas passage, stuck or faulty EGR valve.

Fig 2: Identifying Suzuki Scan Tool Display
Courtesy of SUZUKI OF AMERICA CORP.