Cooling Fan / Generator Belt Removal and Installation: Installation
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
- Install belt to water pump pulley, crankshaft pulley and generator pulley. Install P/S pump drive belt.
- Adjust belt tension as specified.
For adjustment of P/S pump drive belt tension, refer to DRIVE BELT INSPECTION AND ADJUSTMENT.
For adjustment of cooling fan belt tension, refer to COOLING FAN / GENERATOR BELT TENSION CHECK AND ADJUSTMENT .
- Tighten adjusting bolt and pivot bolt referring to COOLING FAN / GENERATOR BELT TENSION CHECK AND ADJUSTMENT .
- Connect negative (-) cable at battery.