DTC Troubleshooting
DTC TROUBLESHOOTING CHART
| Step | Action | Value (s) | Yes | No |
|---|---|---|---|---|
| 1 | Perform an ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK
. Was the check performed? |
- | Go to Step 2. | Go to ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK . |
| 2 | Attempt to start the engine. Does the engine start? |
- | Go to Step 3. | Refer to Engine Cranks But Will Not Run . |
| 3 |
Is DTC P1321 set? |
- | Go to Step 4. | Go to Diagnostic Aids . |
| 4 |
Is a problem found? |
- | Go to Step 5. | Go to Step 6. |
| 5 | Replace the crankshaft. Is the replacement complete? |
- | System OK | - |
| 6 |
Is the repair complete? |
- | Go to Step 7. | - |
| 7 |
Does the scan tool indicate that this diagnostic ran and passed? |
- | Go to Step 8. | Go to Step 2. |
| 8 | Check if any additional DTCs are set. Are any DTCs displayed that have not been diagnosed? |
- | Go to applicable DTC Table . | System OK |