Fuel Rail and Injectors Installation

CAUTION: Different injectors are calibrated for different flow rates. When ordering new fuel injectors, be certain to order the identical part number that is inscribed on the old injector.

Installation should follow the removal procedure in the reverse order.

Fig 1: Identifying Fuel Feeding Pipe
Courtesy of SUZUKI OF AMERICA CORP.
Install the intake manifold. Refer to INTAKE MANIFOLD INSTALLATION .
Tighten:
- Tighten the 7 intake manifold retaining bolts to 10 - 14 N.m (89 - 124 lb-in.).
- Tighten the 4 intake manifold retaining nuts to 10 - 14 N.m (89 - 124 lb-in.).
- Tighten the 2 bolts on the intake manifold support bracket to 10 - 14 N.m (89 - 124 lb-in.).
NOTE: Install the intake manifold after installing the fuel rail.

CAUTION: Genuine intake manifold retaining bolts within the specifications should be used to prevent damaged intake manifold from impairing the airflow to the cylinder.