LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Front Seatback Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seatback Installation

  1. Install the seatback onto the seat cushion.
    CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  2. Install the front seatback bolts.

    Tighten: 

    Tighten the front seatback bolts to 45 N.m (33 lb-ft).

  3. Connect the electrical connectors.
    Fig 1: Removing/Installing Front Seatback And Bolts
    G04720506Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the seat trims to its original position.
  5. Install the back panel onto the seat with the screws.

    Tighten: 

    Tighten the front seat cover screws to 12 N.m (106 lb-in.).

  6. Install the front bucket seat in the vehicle. Refer to Front Bucket Seat Installation .
    Fig 2: Removing/Installing Front Seatback Panel And Screws
    G04720505Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals