Generalized Testing

Set up the watertest stands.

Fig 1: Identifying Watertest Stand Components
Courtesy of SUZUKI OF AMERICA CORP.
Set up the watertest stand leak test.

Fig 2: Identifying Watertest Stand Positions For Leak Test
Courtesy of SUZUKI OF AMERICA CORP.
Perform the watertest stand leak test. Refer to Watertest Stand Specifications .
If the local water pressure does not allow the required water pressure of 155 kPa (22.5 psi), move both stands closer to the vehicle so that the water spray overlaps.

Fig 3: Identifying Positions For Water Spray
Courtesy of SUZUKI OF AMERICA CORP.