Power Driver Seat Slide Assembly Installation
CAUTION:
Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the slide assembly with the bolts and the screws.
Tighten:
- Tighten the slide assembly bolts to 25 N.m (18 lb-ft).
- Tighten the slide assembly screws to 10 N.m (89 lb-in.).
- Connect the electrical connector.
- Install the front seat cushion. Refer to Front Seat Cushion Installation .
- Install the driver seat. Refer to Front Bucket Seat Installation .