Conditions for Setting the DTC

(Condition 1)

• Ignition ON with the engine running.
• HO2S1 voltage is between 0.376 and 0.474 V.
• Exhaust gas temperature is greater than 349.97 °C (661.9 °F).
• No oxygen sensor, system voltage faults exist.
• Internal resistance of the oxygen sensor is greater than 60 kΩ.

(Condition 2)

• Engine operating state not active.
• Sensor shall be in a state of operative readiness.
• No oxygen sensor fault exists.
• Mass air flow integral during pull cut off phase is greater than 1820.40 g.
• Exhaust gas temperature is 599.9 °C (1,112 °F) or less.