Front Bucket Seat Installation

Install the seat.
Connect the electrical connectors.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
Install the bolts into the front portion of the front seat.
Tighten:

Tighten the front seat-to-floor bolts to 25 N.m (18 lb-ft).
Install the plastic caps.

Fig 1: Removing/Installing Plastic Caps And Bolts Front Portion Of Front Seat Of Floor
Courtesy of SUZUKI OF AMERICA CORP.
Install the bolts into the rear portion of the front seat.
Tighten:

Tighten the front seat-to-floor bolts to 25 N.m (18 lb-ft).
Install the plastic caps.
Connect the negative battery cable.

Fig 2: Removing/Installing Plastic Caps And Bolts Rear Portion Of Front Seat Of Floor
Courtesy of SUZUKI OF AMERICA CORP.