LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis >> Transmission >> Manual Transaxle - D16 >> Repair Instructions >> Input Shaft Assemble
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Shaft Assemble

    Fig 1: Cluster Shaft Bearing & Input Shaft Gear Cluster
    GM1251695Courtesy of GENERAL MOTORS CORP.
  1. Press the cluster shaft bearing onto the input shaft gear cluster.
    2. Fig 2: Input Driveshaft & Input Shaft Gear Cluster Assembly
    GM1251697Courtesy of GENERAL MOTORS CORP.
  2. Press the input driveshaft into the input shaft gear cluster assembly.
    3. Fig 3: Snap Ring & Gear Cluster
    GM1251692Courtesy of GENERAL MOTORS CORP.
  3. Install the snap ring at the base of the gear cluster.
    4. Fig 4: Detent Screw & Input Driveshaft
    GM1251691Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the detent screw at the end of the input driveshaft.

    Tighten:  Tighten the input driveshaft detent screw to 15 N.m (11 lb ft).

scientia non olet · About LEMON Manuals