Removal Procedure
- Disconnect the negative battery cable.
- Remove the floor console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
- Remove the cable adjusting nut.
- Disconnect the shift control cable from the shift control lever assembly.
- Remove the shift control cable retaining E-ring.
- Disconnect the shift control cable from the park/neutral position (PNP) switch.
- Remove the E-ring from the shift control cable bracket and disconnect the shift control cable.
- Disconnect the shift control cable from the shift control cable fastener.
- Remove the shift control cable from the vehicle.
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.