Installation Procedure

Fig 1: Installing Shift Control Lever Assembly & Mounting Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the shift control lever assembly and mounting bolts.
Tighten: Tighten the shift control lever assembly mounting bolts to 8 N.m (71 lb in).

Fig 2: Control Cable Adjusting Nut

Courtesy of GENERAL MOTORS CORP.

Connect the control cable to the shift control lever assembly.
Tighten the control cable adjusting nut.
Tighten: Tighten the control cable adjusting nut to 8 N.m (71 lb in).

Fig 3: Wiring Harness Connectors & Shift Control Lever

Courtesy of GENERAL MOTORS CORP.

Connect the harness connector.
Adjust the control cable. Refer to Automatic Transmission Range Selector Cable Adjustment .
Install the floor console. Refer to Console Replacement - Front Floor .
Connect the negative battery cable.