LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Ignition and Start Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Ignition Switch Electrical Connection
    GM1248394Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition switch with the ignition switch retaining screw.

    Tighten 

    Tighten the ignition switch retaining screw to 2 N.m (18 lb in).

  2. Connect the connector to the ignition switch.
    3. Fig 2: View of Instrumental Panel Lower Cover
    GM1248378Courtesy of GENERAL MOTORS CORP.
  3. Install the upper and the lower steering column cover panels.
  4. Install the lower steering column cover panel screws.

    Tighten 

    Tighten the lower steering column cover panel screws to 3 N.m (27 lb in).

  5. Turn the steering wheel in order to access the upper steering column cover panel screw holes. Install the upper steering column cover panel screws.

    Tighten 

    Tighten the upper steering column cover panel screws to 3 N.m (27 lb in).

  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals