Installation Procedure
- Install the clock spring to the steering shaft. Refer to Inflatable Restraint Steering Wheel Module Coil Centering .
- Install the new screws.
Tighten: Tighten the clock spring screws to 3 N.m (27 lb in).
- Connect the driver air bag, horn, and connectors to the lower steering column.
- Install the driver side knee bolster or instrument panel lower cover.
- Install the upper and lower steering column covers, and install the screws.
- Install the steering wheel. Refer to Steering Wheel Replacement .
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
.