LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis >> Quick Lookups >> Electrical Component Locations >> Wiring Systems >> Diagnostic Information and Procedures >> Pull to Seat Connectors >> Terminal Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Terminal Installation

  1. Align the terminal and pull the wire from the back of the connector in order to seat the terminal.
  2. If necessary, cut the new wire to proper length and splice with existing circuit. Refer to Splicing Copper Wire Using Splice Sleeves .
  3. If the connector is outside of the passenger compartment, apply dielectric grease to the connector.
  4. Install the TPA, CPA and/or the secondary locks.
scientia non olet · About LEMON Manuals