LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Front Seat Replacement - Bucket >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Front Seat and Electrical Connector
    GM1248229Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the driver seat.
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolts into the front and rear portion of the front seat.

    Tighten:  Tighten the front and rear bucket seat bolts to 25 N.m (18 lb ft).

scientia non olet · About LEMON Manuals