LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Rear Side Door Sill Plate Replacement (Notchback) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Rocker Trim Panel Screws
    GM1721810Courtesy of GENERAL MOTORS CORP.
  1. Install the rear rocker trim panel.
  2. Install the rear rocker trim panel with the screw.
  3. NOTE: Refer to Fastener Notice .
  4. Install the rear seat back with the bolt.

    Tighten:  Tighten the rear seatback bolt to 25 N.m (18 lb ft).

  5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .