Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clip, Bolt & Universal Joint

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Battery Disconnect Caution .

Disconnect the negative battery cable.
Remove the rod clamp. Refer to Shift Linkage Adjustment .
Remove the clip and the bolt from the universal joint.
Separate the universal joint from the transaxle.

Fig 2: Transaxle Rear Mounting Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the fixing shaft pin and separate the linkage connection part from the transaxle rear mounting bracket.
Remove the shift linkage assembly.