Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transaxle Rear Mounting Bracket

Courtesy of GENERAL MOTORS CORP.

Install the shift linkage assembly.
Install the fixing shaft pin and connect the linkage connection part to the transaxle rear mounting bracket.

Fig 2: Clip, Bolt & Universal Joint

Courtesy of GENERAL MOTORS CORP.

Install the universal joint to the transaxle.
Install the clip and the bolt from the universal joint.
Install the rod clamp.
Adjust the shift linkage. Refer to Shift Linkage Adjustment .
Connect the negative battery cable.