Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of FTP Sensor

Courtesy of GENERAL MOTORS CORP.

Install the FTP sensor to the fuel sender assembly.

Fig 2: View of Fuel Tank Pressure Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the FTP sensor electrical connector.

Fig 3: Removing/Installing Fuel Pump Access Cover

Courtesy of GENERAL MOTORS CORP.

Install the fuel pump access cover.
Install the rear seat. Refer to Rear Seat Cushion Replacement .
Connect the negative battery cable.
Install the fuel fill cap.