Removal Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Turn OFF the ignition.
- Disconnect the electrical connector from the intake air temperature (IAT) sensor.
- Disconnect the breather tube from the air cleaner intake duct.
- Loosen the clamps securing the air cleaner intake duct.
- Remove air cleaner intake duct.
IMPORTANT:
The intake air temperature sensor is no longer replaced as a seperate service item. If the intake air temperature sensor is faulty, replacement of the entire air cleaner inlet duct will be necessary.